ErnieKey (3766427) writes Earlier this month, surgeons at Zhejiang University in China performed a surgery to remove two damaged vertebrae from a 21-year-old patient. In their place they inserted a 3D printed titanium implant which was shaped to the exact size needed for the patient's body. The surgery, which took doctors much less time and provided significantly less risk [than conventional surgery] was completely successful and the patient is expected to make a full recovery. This is said to be the first ever surgery involving 3D printing vertebrae in order to replace a patient's thoracic vertebrae.

Lucas123 writes: Thousands of 3D printer owners who are part of a distributed online network were tapped for a buyer's guide, rating dozens of machines from tiny startups to major manufacturers. Surprisingly, the big-name 3D printer makers were nowhere to be found in the top picks. More obscure companies, like Makergear, a 12-person start-up in Ohio, or Zortrax, a Polish company that began as a Kickstarter project, took top spots in the reviews. The buyer's guide, put together by 3D Hubs, contains five different categories: Enthusiast Printers, Plug-n-Play Printers, Kit/DIY Printers, Budget Printers and Resin Printers. In all, 18 models made it to the top of the user communities' list, and only printers with more than 10 reviews were included in the buyer's guide. 3D Hubs also added a secondary "Printer Index" that includes 58 3D Printers that didn't make it to the top of their categories. Printers with more than five reviews are displayed in the index.

DeviceGuru writes: Hardkernel has again set its sights on the Raspberry Pi with a new $35 Odroid-C1 hacker board that matches the RPI's board size and offers a mostly similar 40-pin expansion connector. Unlike the previous $30 Odroid-W that used the same Broadcom BCM2835 SoC as the Pi and was soon cancelled due to lack of BCM2835 SoC availability, the Odroid-C1 is based on a quad-core 1.5GHz Cortex-A5 based Amlogic S805 SoC, which integrates the Mali-400 GPU found on Allwinner's popular SoCs. Touted advantages over the similarly priced Raspberry Pi Model B+ include a substantially more powerful processor, double the RAM, an extra USB2.0 port that adds Device/OTG, and GbE rather than 10/100 Ethernet.

New submitter MRothenberg writes: Just in time for the holidays, the UK's postal service is testing out a 3D printing service at its central London delivery center. Customers can order "ready-to-print" objects (including shoes, soap dishes and phone cases) or bring in their own originals to duplicate and send via Royal Mail. The postal company's COO predicts consumer demand for 3D printing will grow 95 percent by 2017.

retroworks writes This week's print edition of The Economist has an essay on the Right to Tinker with hardware. From the story: "Exactly why copyright law should be involved in something that ought to be a simple matter of consumer rights is hard to fathom. Any rational interpretation would suggest that when people buy or pay off the loan on a piece of equipment—whether a car, a refrigerator or a mobile phone—they own it, and should be free to do what they want with it. Least of all should they have to seek permission from the manufacturer or the government."

mrspoonsi sends news of an IBM study (PDF) which found that discarded laptop batteries could be used to power lights in areas where there's little or no electrical grid. Of the sample IBM tested, 70% of the used batteries were able to power an LED light for more than four hours every day throughout an entire year. The concept was trialed in the Indian city of Bangalore this year. The adapted power packs are expected to prove popular with street vendors, who are not on the electric grid, as well as poor families living in slums. The IBM team created what they called an UrJar — a device that uses lithium-ion cells from the old batteries to power low-energy DC devices, such as a light. The researchers are aiming to help the approximately 400 million people in India who are off grid.

You can spend less than $500 if you like. That's the maximum amount allowed if you're competing in the Power Racing Series. Interviewee Josh Lee is a member of the Southern Polytechnic State University Electric Vehicle Team. The modified electric 'ride on' toy they showed off and raced at Maker Faire Atlanta (where this video was made) is just one of their many projects. And, obviously, they're just one of many 'slightly deranged' teams involved in learning about and building electric vehicles. (Alternate Video Link)

EVChallenge is a high school student project that converts gas cars to electric. This isn't a "someday" thing. It's already happening, and Ben has worked hard to make it so in N. Carolina. There are other people around the world doing EVChallenge, and Ben does a number of things besides EVChallenge. His Kickstarter project, for instance, was called Help Bring Back Quality Science Kits (STEM Education). It closed on October 17 after 119 backers came through with $6523, which was a lot more than Ben's modest $3500 goal. This takes us to Ben's EVChallenge simulator itself, which is a simple "breadboard" simulation of the circuitry that drives an electric car so students can learn EV (electric vehicle) principles before they work on the real thing.

This is all part of the Harris Educational effort to make science teaching fun and interesting, not just with electric cars and simulations of their circuitry, but with other kits and even training services. As Ben's Training Services page says, "Harris Educational can provide face-to-face or online training for individuals, small groups, or companies. We can also help you design and implement your own training programs." So besides the video interview here, please look at Ben's pages, this article about his work, and check some of the videos on his assorted pages. It's good stuff, especially if you have (or plan to have) kids in high school. (Alternate Video Link)

Iddo Genuth writes Until 20 years ago even the best telescopes in the world could not detect a planet outside our solar system. Now, with the aid of a basic DSLR, low cost lens and some DIY magic, you just might be able to "see" ET's home planet for yourself. Your DSLR can do much more than just take a few nice portraits or the occasional vacation photos – if you have some DIY experience (O.K. a bit more than just "some"), you might be able to repeat what David Schneider was recently been able to do — that is, building his own planet finder using only inexpensive photo gear, low cost electronics, the right kind of software and a lot of patience. Although Schneider was "only" able to rediscover an already known exsoplanet (some 63 light-years away from us), what he did — and more importantly how he did it — might allow planet hunting to become closer to SETI@home than NASA's 550,000 million dollar Kepler space telescope project.

A bit of housing insulation material, a battery, a motor and propellor, a radio receiver and transmitter, and servos to control the motor and a pair of ailerons, and you're ready to fly the Brooklyn Aerodrome way. This isn't a tiny radio-controlled paper airplane, but a big bruiser with a 1:1 power to weight ratio (which means it can climb like a bat out of hell) and enough guts to fly in reasonably windy conditions while carrying a camera -- except we'd better not mention cameras, since Brooklyn Aerodrome creations, whether kits or plans, are obviously intended tohelp you build model airplanes, not drones. Timothy ran into project proponent Breck Baldwin at a maker faire near Atlanta, surrounded by a squadron of junior pilots who may someday become astronauts on the Moon - Mars run -- or at least delivery drone controllers for Amazon. (Alternate Video Link)

An anonymous reader writes: NASA reports that the 3-D printer now installed on the International Space Station has finally finished its first creation. After it was installed on November 17th and calibrated over the next week, ground control sent it instructions yesterday to build a faceplate for the extruder's own casing. The process was mostly a success. "[Astronaut Butch Wilmore] Wilmore removed the part from the printer and inspected it. Part adhesion on the tray was stronger than anticipated, which could mean layer bonding is different in microgravity, a question the team will investigate as future parts are printed. Wilmore installed a new print tray, and the ground team sent a command to fine-tune the printer alignment and printed a third calibration coupon. When Wilmore removes the calibration coupon, the ground team will be able to command the printer to make a second object. The ground team makes precise adjustments before every print, and the results from this first print are contributing to a better understanding about the parameters to use when 3-D printing on the space station."

Dan Mcculley, the interviewee in this video, works for Intel and claims they have "about 140" projects going on inside their fabs and factories, of which the Smart Toolbox is but one, and it's one some technicians came up with because Intel workers lose something like $35,000 worth of tools every year. This project is based on the same Galileo boards Intel has used to support some high-altitude balloon launches -- except this is an extremely simple, practical application. Open source? You bet! And Dan says the sensors and other parts are all off-the-shelf items anyone can buy. (Alternate Video Link)

New submitter lars_stefan_axelsson writes: When I was an undergrad in the eighties, "building" a computer meant that you got a bunch of chips and a soldering iron and went to work. The art is still alive today, but instead of a running BASIC interpreter as the ultimate proof of success, today the crowning achievement is getting Linux to run: "What does it take to build a little 68000-based protoboard computer, and get it running Linux? In my case, about three weeks of spare time, plenty of coffee, and a strong dose of stubbornness. After banging my head against the wall with problems ranging from the inductance of pushbutton switches to memory leaks in the C standard library, it finally works! (video)"

An anonymous reader writes: When looking for a new (or used) car, I have readily available information regarding features, maintenance history, and potential issues for that specific model or generation. What I would really like is a car that is readily hackable on the convenience-feature level. For example, if I want to install a remote starter, or hack the power windows so holding 'up' automatically rolls it up, or install a readout on the rear of the car showing engine RPMs, what make/model/year is the best pick? Have any of you done something similar with your vehicle? Have you found certain models to be ideal or terrible for feature hacking?

This is not a practical bike. "Even on smooth pavement, your vision goes blurry because you're vibrating so hard," Collin said to an Atlanta Journal-Constitution reporter back in 2012 when he was only 15 -- and already building wooden bicycles. Collin's wooden bikes are far from the first ones. Wikipedia says, "The first bicycles recorded, known variously as velocipedes, dandy horses, or hobby horses, were constructed from wood, starting in 1817." And not all wooden bicycles made today are as crude as Collin's. A Portland (OR) company called Renovo makes competition-quality hardwood bicycle frames -- for as little as $2200, and a bunch more for a complete bike with all its hardware fitted and ready to roll.

Of course, while it might be sensible to buy a Renovo product if you want a wood-framed bike to Race Across America, you won't improve your woodworking skills the way Collin's projects have improved his to the point where he's made a nice-looking pair of wood-framed sunglasses described in his WOOD YOU? SHOULD YOU? blog. (Alternate Video Link)

ErnieKey (3766427) writes Artist Jonty Hurwitz has created the world's smallest sculptures: nanosculptures, no wider than a human hair and unable to be seen without an electron microscope, created using a specialized 3D printing process. Hurwitz says this project was 'Art, literally created with Quantum Physics.' While this seems quite a claim, it seems to be very well deserved. Hurwitz enlisted a team of approximately 15 people to help him bring his vision to life. After scanning his models in a 200-camera array, the sculptures were printed — with advice from the Weizmann Institute of Science — using a 3D print technique by the Institute of Microstructure Technology at the Karlsruhe Institute of Technology, with multiphoton lithography used for the fine detail work.

Hallie Siegel writes In order for a robot to be useful in our world, it must be able to traverse unpredictable obstacles, including stairs. But currently available robot chassis tend to be either too small or extremely expensive, and most platform kits cannot leave a controlled environment – a huge problem for makers who want to get outside the lab or workshop. This has been an extremely hard problem for roboticists to solve, but the Ground Drone Project wants to change all that with its low-cost ground robot chassis. Check out this innovative design. (Currently, the project is raising money through Kickstarter; if it succeeds, "the instructions and bill of materials will be available for all.")

New submitter engineerguy writes We discovered a 100 year old 19th century computer that does Fourier analysis with just gears spring and levers. It was locked in a glass case at the University of Illinois Department of Mathematics. We rebuilt a small part of the machine and then for two years thoroughly photographed and filmed every part part of the machine and its operation. The results of this labor of love are in the video series (short documentary), which is 22 minutes long and contains stunning footage of the machine in action — including detailed descriptions of how it operates. The photos are collected in a free book (PDF). The computer was designed by Albert Michelson, who was famous for the Michelson-Morley experiment; he was also the first American to win a Nobel Prize in physics.

Joe Gilmore was showing some of his work at Maker Faire Atlanta when Timothy Lord pointed his camera at him. Joe may never create a Mars colony or build the tallest skyscraper in North America, but what he does is fun to the point of whimsy, and seems to bring smiles to a lot of faces. (Alternate Video Link)

Taffykay writes Biology and computer science students and professors at Wake Forest University have teamed up to develop a device to assist the visually impaired. Following the principles of echolocation used by bats and moths, the interdisciplinary team has developed a watch-like unit that allows the wearer to navigate their environment using sonar. To make the project even more remarkable, all the parts and materials for the prototype cost less than $60.