krou writes "The BBC covered the most recent Newcastle Maker Faire, an event which Slashdot first covered last year. From racing power tools, to making music using electric sparks, or a robot that solves the Rubik's Cube in 20 seconds, makers, crafters and hackers were out in force. YouTube has a selection of videos available, and there are some pics on Flickr. And, while it may not be a hover board, there was a self-balancing skateboard."

stronghawk writes "The creator of the Nickel-O-Matic is back at it and has now built a Turing Machine from a Parallax Propeller chip-based controller, motors, a dry-erase marker and a non-infinite supply of shiny 35mm leader film. From his FAQ: 'While thinking about Turing machines I found that no one had ever actually built one, at least not one that looked like Turing's original concept (if someone does know of one, please let me know). There have been a few other physical Turing machines like the Logo of Doom, but none were immediately recognizable as Turing machines. As I am always looking for a new challenge, I set out to build what you see here.'"

ganjadude writes "So I am moving to a location where the cell signal is very poor (I don't get signal inside my house), and I have been looking at wireless extenders such as the ones that Sprint and Verizon have. I am brought down by the cost (Sprint charges monthly, Verizon $250 up front, AT&T.... well they are AT&T). Being that this is Slashdot, and a lot of us live in basements (I kid!), I assume that some of the crowd has had this issue in the past. What have you done, or what alternatives are available to someone in such a situation?"

krou writes "With a budget of £500, Robert Harrison used cheap parts, a weather balloon, some duct tape, a digital camera, and a GPS device to capture some great photos of the earth from space that resulted in NASA calling him to find out how he had done it. 'A guy phoned up who worked for NASA who was interested in how we took the pictures,' said Mr Harrison. 'He wanted to know how the hell we did it. He thought we used a rocket. They said it would have cost them millions of dollars.' The details of his balloon are as follows: he used 'an ordinary Canon camera mounted on a weather balloon,' 'free software' that 'reprogrammed the camera to wake up every five minutes and take eight photographs and a video before switching off for a rest.' He also ensured the camera was 'wrapped in loft insulation' to make sure it could operate at the cold temperatures. The GPS device allowed him to pinpoint the balloon's location, and retrieve the camera when it fell down to earth attached to a small parachute."

An anonymous reader writes "Researchers from the University of Liege in Belgium have been able to perform real-time video analysis on a regular Canon digicam (video link) without any hardware modification. The results are shown directly on the digicam's screen. They use a hacked version of a popular open-source alternative firmware for Canon cameras: CHDK. This is a proof-of-concept that computer vision algorithms can now be embedded on regular Canon digicams with little effort (CHDK is coded in C). What other popular vision algorithms could be implemented? For what purpose?" You can get some idea about ViBe from this abstract at IEEE; basically, it allows background extraction in moving images.

adeelarshad82 writes "The open-source Arduino electronics platform has received a ton of attention from the hardware enthusiast community. And one more follower is joining the fray — Mario himself. The mustachioed plumber of console video game fame has been converted into an eight-by-eight LED matrix by Carnegie Mellon University student Chloe Fan. However, the game isn't quite the Mario you know from your legacy Nintendo Entertainment System. For starters, it's just lights. While one often sees the game's LED-backed grid used in devices like the open-source Monome, where it can function as a push-button toggle for music beats and effects, Fan's version of Mario uses the grid as a display only. Mario — or rather, a one-light representation of the game's hero — is controlled NES-style through the use of two buttons. One button makes Mario move forward; the other makes him leap into the air."

andylim writes "It's been rumoured for some time now that Apple will include RFID technology in a future iPhone. An RFID-packing iPhone could interact with various objects including opening doors and it could even be used in shops to register items at the checkout. Beating Apple to the RFID punch, last year a company called Wireless Dynamics announced an iPhone RFID accessory called the iCarte, but if you'd rather make your own reader then you'll be interested to know how a research assistant at University College London has managed to build his own RFID iPhone accessory."

b4dc0d3r writes "How do you make sense of the various model numbers or naming schemes for CPUs, graphics cards, and the related chipsets? All I want is something that will run Oblivion and output full 1080 video to a TV. Last time I built my own computer I just went to Pricewatch, made a few easy choices, and everything came to my door. Do I really have to research the differences among Core i5, Core 2 Duo, Pentium 4, Pentium D, Sempron, Athlon, Phenom ...? And that's just the processor. Is there a reference somewhere? In short, how do you buy a computer these days?"

jones_supa writes "Pixel Qi has just revealed their DIY kit for netbooks, planned to be out near the end of Q2 — sounds like June. This makes it possible to retrofit a screen to one fully readable in direct sunlight. In her blog, Mary Lou Jepsen says: 'It’s only slightly more difficult than changing a lightbulb: it’s basically 6 screws, pulling off a bezel, unconnecting the old screen and plugging this one in. That’s it. It’s a 5 minute operation.' She also talks about the 'laptop hospital,' a service depot started by kids in Africa."

SeanLind writes "After writing a similar article for converting your Rock Band guitar I got flooded with feedback and requests for a Drum Kit versions. So that's exactly what I did, three easy steps to converting your Rock Band drum kit into a wireless game controller, and using that to play online poker."

Wael Chatila writes "By adding an on-board computer and a camera on a Roomba, the Roomba can be used to index your home. As a bonus, you can also control the Roomba across an internet connection, and see the images from the camera — a spybot for you to check on your own home while you are out."

kidcharles writes "I'm working on a project that requires writing bits to a magnetic hard drive platter in a completely controlled fashion. I need to be able to control exactly where 1s and 0s will appear physically on the platter. Normally when data is written to a drive the actual bits that get written are determined by the file system being used, as modified by whatever kind of error handling the drive itself is using (e.g. Reed-Solomon). All of the modern innovations in file systems and error handling are great for reliable and efficient data storage, but they are making my particular task quite daunting. My question for Slashdot: is there a way to get down to the 'bare metal' and write these bits? Any good utilities out there to do this? Obviously a free and open source solution would be preferable, but I'm open to anything at this point."

ptorrone writes "Hardware hacker 'Ladyada' has released an open source, retro, arcade-style, table-tennis-for-two clock called the MONOCHRON. According to the MONCHRON project page the desire was 'to make a clock that was ultra-hackable, from adding a separate battery-backed RTC to designing the enclosure so you could program the clock once its assembled.' It includes an ATmega328 processor (with Arduino stk500 bootloader for easy hacking. It's completely open source hardware: all firmware, layout, and CAD files are yours to mess with."

watanabe writes "I just moved from a house with Cat5e wiring to a house with ... a whole bunch of coax cables. Like, my living room has five coax cables coming out of a hole in the wall. All of them go back up to my attic. The house is big, (and I like it, thank you), but I have realized that our digital usage pattern (media server + squeezeboxes + remote time machine backups to a linux box) will not work without wiring. I am currently bridging some old Linksys WRT54Gs to the right places, but of course, that slows everything down. This got me thinking: 100mb ethernet is four wires, yes? And I have four wires for every two coax cables. What about a two coax-head -> ethernet jack setup? Has anyone done this before? Searching online only gives me $100+ coaxethernet transceiver type boxes. At that price, a HomePNY system would make more sense. I'm willing to solder if I have to, but I first wanted to get advice and holes shot in my plan, if there are any."

schliz writes "The Federal Court has ordered an Australian distributor to pay Nintendo over half a million dollars for selling the R4 mod chip, which allows users to circumvent technology protection measures in Nintendo's DS consoles. The distributor, RSJ IT Solutions, has been ordered to cease selling the chip through its gadgetgear.com.au site and any other sites it controls, as well as paying Nintendo $520,000 in damages."

Andrew "bunnie" Huang, whom we've discussed before for his book on Xbox hacking and development of the Chumby, has made an interesting blog post about problems he's found with Kingston microSD cards. He first encountered a batch of bad cards during production of the ChumbyOne, and found Kingston initially unhelpful when trying to get them replaced. After noticing some unusual markings on the chips, he decided to investigate for himself, comparing the ID data and dissolving the cards' casings with nitric acid to take a look inside. He found that each of his Kingston-branded samples actually had a Toshiba/SanDisk memory chip inside, and that the batch of low-quality cards he received may not be as uncommon as he thought. "Significantly, Kingston is revealed as simply a vendor that re-marks other people's chips in its own packaging. Every Kingston card surprisingly had a SanDisk/Toshiba memory chip inside, and the only variance or 'value add' that could be found is in the selection of the controller chip. ... This tells me that Kingston must be crushed when it comes to margin, which may explain why irregular cards are finding their way into their supply chain. Kingston is also probably more willing to talk to smaller accounts like me because as a channel brand they can't compete against OEMs like Sandisk or Samsung for the biggest contracts from the likes of Nokia or RIMM. Effectively, Kingston is just a channel trader and is probably seen by SanDisk/Toshiba as a demand buffer for their production output. I also wouldn't be surprised if SanDisk/Toshiba was selling Kingston 'A-' grade parts, i.e., parts with slightly more defective sectors, but otherwise perfectly serviceable. As a result, Kingston plays a significant and important role in stabilizing microSD card prices and improving fab margins, but at some risk to their own brand image."

BiggerIsBetter writes "Christopher Tarnovsky has pulled off the 'near impossible' TPM hardware hack. We all knew it was only a matter of time; this is why you shouldn't entrust your data to proprietary solutions. From the article: 'The technique can also be used to tap text messages and email belonging to the user of a lost or stolen phone. Tarnovsky said he can't be sure, however, whether his attack would work on TPM chips made by companies other than Infineon. Infineon said it knew this type of attack was possible when it was testing its chips. But the company said independent tests determined that the hack would require such a high skill level that there was a limited chance of it affecting many users. ... The Trusted Computing Group, which sets standards on TPM chips, called the attack "exceedingly difficult to replicate in a real-world environment."'"

theodp writes "Having cut his programming teeth on an Apple ][e as a ten-year-old, Mark Pilgrim laments that Apple now seems to be doing everything in their power to stop his kids from finding the sense of wonder he did: 'Apple has declared war on the tinkerers of the world. With every software update, the previous generation of "jailbreaks" stop working, and people have to find new ways to break into their own computers. There won't ever be a MacsBug for the iPad. There won't be a ResEdit, or a Copy ][+ sector editor, or an iPad Peeks & Pokes Chart. And that's a real loss. Maybe not to you, but to somebody who doesn't even know it yet.'"

An anonymous reader writes "I've just posted packages for installing a Qt-based platform on the Kindle 2 and DX devices, and a Sudoku game to go along with it. The Qt-based platform includes plugins I wrote for the e-ink display, the keyboard, and the five-way joystick thing — so it's a fully interactive and usable environment now. Soon I'll be adding a sample app with source code to go along with it."

harrymcc writes "In 1911, Thomas Edison bragged that he could make a 40,000-page book by printing the pages on thin pieces of metal. In the mid-1930s, newspapers experimented with transmitting special editions into homes via early fax machines. In 1956, Chrysler tried to sell Americans on buying 7-inch records that could only be played on a tiny turntable built into its cars' dashboards. Over at Technologizer, I rounded up these and a dozen other fascinating, forgotten gadget ideas that didn't work out — but which foreshadowed products and technologies that eventually became a big deal."