DeviceGuru (1136715) writes "Intel and CircuitCo have revealed a smaller, faster, 2nd-gen MinnowBoard open SBC based on an Atom E3800 SoC and supported by both Android 4.4 and various standard Linux OSes. The MinnowBoard Max, which will ship in Q3 starting at $99, blows past the original MinnowBoard (Slashdot video) on price, performance, and energy consumption. The 3.9 x 2.9-inch Max's $99 starting price includes a 64-bit 1.46GHz Intel Atom E3815 (Bay Trail-T) CPU, 1GB RAM and 8GB SPI flash, and coastline ports for MicroSD, Micro-HDMI, GbE, dual USB, and SATA. Unlike the original MinnowBoard, the Max provides two expansion connectors: a low-speed header, with signals similar to the Arduino's Shield connector; and a high-speed connector, which can support mSATA and mini-PCIe sockets on expansion modules, among other interfaces. Although the Max's design supports CPUs up to Intel's quad-core 1.91GHz (10W TDP) E3845, only two choices shown initially at MinnowBoard.org, with the higher-end $129 model stepping up to a 1.33GHz dual-core E3825 plus 2GB RAM.."

cold fjord writes: "According to Reason, 'Last May, Cody Wilson produced an ingeniously brief but nuanced manifesto about individual liberty in the age of the ever-encroaching techno-state-a single shot fired by a plastic pistol fabricated on a leased 3D printer. While Wilson dubbed his gun The Liberator, his interests and concerns are broader than merely protecting the Second Amendment. ... Wilson is ultimately aiming for the 'transcendence of the state.' And yet because of the nature of his invention, many observers reacted to his message as reductively as can be: 'OMG, guns!'... But if armies of Davids really want to transcend the state, there are even stronger weapons at their disposal: toothbrush holders, wall vases, bottle openers, shower caddies, and tape dispensers. ... In many ways, it's even harder to imagine a city of, say, 50,000 without big-box retailers than it is to imagine it without a daily newspaper. So perhaps 3D printing won't alter our old habits that substantially. We'll demand locally made kitchen mops, but we'll still get them at Target. We'll acquire a taste for craft automobile tires, but we'll obtain them from some third party that specializes in their production. Commercial transactions will still occur. But if history is any guide, more and more of us will soon be engaging in all sorts of other behaviors too. Making our own goods. Sharing, swapping, and engaging in peer-to-peer commerce. Appropriating the ideas and designs of others and applying them to our own ends.'"

An anonymous reader writes: "Mining new Bitcoins is computationally expensive — you can't expect to do much on your standard home computer. Many miners have built custom rigs to mine more efficiently, but it was only a matter of time until somebody went industrial. Dave Carlson's goal is to mine 10% of all new Bitcoins from now on. He's built literally thousands of units. They collectively use 1.4 million BitFury mining chips, which are managed by a bunch of Raspberry Pis. 'The current rigs each contain 16 boards, with each board containing 16 BitFury chips, for a total of 256 mining chips on each rig. Carlson said about 90,000 processor boards have been deployed, which would put the number of rigs at about 5,600. A new board [being designed] will have 756 chips on each rig instead of 256.' Carlson says his company spent $3-5 million to get everything set up. They current generate 7,000 — 8,000 Bitcoins per month, which, at current rates, would be worth over $4 million."

Lemeowski (3017099) writes "In a time where there's a 'gold rush' for 3D printing patents, there's one company that's doing everything it can to keep its 3D printers as open as possible. Jeff Moe, CEO of Aleph Objects, said in an interview with Opensource.com that his company's strategy is 'to not patent anything, but to establish prior art as soon as we can. So when we develop things we try to push it out there as soon as possible and hope to establish prior art if there isn't prior art already. That allows us to develop a lot more quickly.' The company makes the Lulzbot 3D printers, and goes to the extreme of publishing every last detail about its printers, Moe said, including syncing its internal file system that it uses to share files on the development of the machine to the public every hour so you can see what they're doing."

First time accepted submitter Trep (366) writes "I thought Slashdot readers might be interested in seeing how my friend is slowly building a 3D printed toolbox. He's created a fully functional tape measure which is 3D printed as a single assembly, to follow up on his 3D printed dial calipers. This is a pretty novel design, with a lot of moving parts that come out of the printer completely assembled!"

Actually, I do RTFA writes "We recently heard about the confiscation of a delivery of multimeters to SparkFun for infringing on Fluke's trademark. One common thread in the discussions was the theme that Fluke should have let that shipment through as a goodwill gesture to SparkFun and the Maker community. Well, Fluke did one better. They announced they were sending more than $30k worth of official multimeters to SparkFun for them to do whatever they want with. SparkFun is most likely going to give them away. A great example of win-win-win?"

An anonymous reader writes "My colleague at IEEE Spectrum, Eliza Strickland, looked at the home transcranial direct current stimulation (tDCS) movement. People looking to boost creativity, or cure depression, are attaching electrodes to their heads using either DIT equipment or rigs from vendors like Foc.us. Advocates believe experimenting with the tech is safe, but a neuroscientist worries about removing the tech from lab safeguards..."

An anonymous reader writes "Autodesk has announced that after the 2015 version of Softimage, which is scheduled for release next April, it will no longer provide software support. The publisher has confirmed the rumors last month, according to which Autodesk intends to terminate its software for 3D modeling and animation. 'We regret to inform you that the next version of Softimage 2015 will be the last,' can be read on the Autodesk website. 'This latest version will be released around April 14, 2014. Autodesk will continue to provide support for up to 30 April 2016. '"

Via Phoronix comes news that Debian has been ported to the OpenRISC architecture by Christian Svensson. Quoting his mailing list post: "Some people know that I've been working on porting Glibc and doing some toolchain work. My evil master plan was to make a Debian port, and today I'm a happy hacker indeed! ... If anyone want to try this on real hardware (would be very cool to see how this runs IRL), ping me on IRC [#openrisc on freenode] and I'll set you up with instructions how to use debootstrap - just point to a repo with the debs and you're all set, the wonders of binary distributions." For those who don't know, OpenRISC is the completely open source RISC processor intended as the crown jewel of the Opencores project. A working port of glibc and a GNU/Linux distribution is a huge step toward making use of OpenRISC practical. There's a screencast of the system in action, and source on Github (at posting time, it was a month out of date from the looks of it). Christian Svensson's Github account also has repos for the rest of the toolchain.

szczys writes "Gregory Charvat has been playing with and teaching others about entry-level radar concepts for a long time. Now he's sat down and explained how you can do it yourself inexpensively. He says, 'One enabling technology for Radar was the cathode ray tube (CRT), which facilitated a method of measuring the time delay between transmitted and received waveforms. ... Today, rather than using a CRT we can use high-speed digitizers. This offers the obvious advantage of applying signal processing to acquired data so that only moving targets are detected, tracking can be achieved, imaging, and a multitude of other modes. But for hobbyist and consumer projects we do not need this much power, range, and can not afford the cost. We need the ability to sense like a long range radar (detecting only moving targets, imaging, Doppler, signatures, etc) but at short ranges and at low costs.' Charvat then proceeds to walk through several options for the amatuer hardware hacker."

An anonymous reader writes "Shubham Banerjee, a seventh grader in California, has developed a braille printer made from a $350 Lego Mindstorms EV3 kit and some simple hardware. He calls the science fair project the Braigo. 'The Braigo's controller is set up to scroll through the alphabet. You choose a letter and it prints it out with tactile bumps on a roll of calculator paper. The print head is actually a thumbtack, which Banerjee settled on after also testing a small drill bit and a mechanical pencil. The first prototype isn't terribly fast, but it proves the concept works. Banerjee is working on improvements that will allow it to print full pages of text.'"

sfcrazy writes "The Free Software Foundation has approved TAZ 3 as privacy-respecting, and awarded it 'Respects Your Freedom' certification. TAZ 3 is the fifth model in the LulzBot line of 3D printers by Aleph Objects, Inc. FSF has certified other models of LulzBot 3D printer for respecting privacy as well."

mspohr writes with this excerpt from The Register: "Spanish hackers have been showing off their latest car-hacking creation; a circuit board using untraceable, off-the-shelf parts worth $20 that can give wireless access to the car's controls while it's on the road. The device, which will be shown off at next month's Black Hat Asia hacking conference, uses the Controller Area Network (CAN) ports car manufacturers build into their engines for computer-system checks. Once assembled, the smartphone-sized device can be plugged in under some vehicles, or inside the bonnet of other models, and give the hackers remote access to control systems. 'A car is a mini network,' security researcher Alberto Garcia Illera told Forbes. 'And right now there's no security implemented.'"

An anonymous reader writes "Gamer rage is a common phenomenon among people who play online, a product of the intense frustration created by stressful in-game situations and an inability to cope. It can have significant impact on the gamer's ability to play well, and to get along with others. To combat this rage and train gamers to deal with the stress, visual designer Samuel Matson of Seattle has created the Immersion project, integrating a pulse sensor tied to a Tiny Arduino with Bluetooth into a headset to monitor the gamer's heart rate. The heart rate data is sent in real time to the gaming PC, where it is displayed in the game. Matson even created a simple FPS using the Unity game engine that varies the AI and gaming difficulty based on the user's heart rate. Using this system, the gamer is able to train themselves to recognize the stress and learn to control it, in order to make them a much more agreeable and competitive player."

An anonymous reader writes "Google's recent acquisition of Nest, the maker of smart thermostats and smoke detectors, has sparked concerns of future plans for the devices, and how Google's omnipresent thirst for information will affect them. Thus, a team of engineers at Spark sat down and roughed out a prototype for an open source version of Nest. It looks surprisingly good for such a short development cycle, and they've posted their code on Github. The article has a number of short videos illustrating the technology they used, and how they used it. Quoting: 'All in, we spent about $70 on components to put this together (including $39 for the Spark Core); the wood and acrylic were free. We started working at 10am and finished at 3am, with 3.5 engineers involved (one went to bed early), and the only work we did in advance was order the electronic components. We're not saying that you can build a $3.2 billion company in a day. But we are saying that you can build a $3.2 billion company, and it's easier now than it's ever been before.'"

An anonymous reader writes "Ok, fellow geeks... I have the luxury of finally building my dream home from scratch. It's going to be good sized (~4000 sq ft over 3 levels), and rather than run around at night to make sure my lights are off, doors are locked, garage is closed, etc, I really want to put in a home automation system. Since the walls aren't up, this is the time for complete flexibility as to my options. The last time I did a whole house, it was years ago, X10. Since then, lots of other protocols, both 'proprietary' and more general (like WiFi) have come on the market for devices — all better than what I've worked with in the past. What do you all have experience with and recommend as reliable, secure, and fairly easy to use? Something with a good chance for long term availability of parts and features would be a bonus."

A while ago you had the chance to ask inventor Alan Adler about making the perfect cup of coffee and throwing things really far. Below you'll find his best coffee brewing tips and the answers to those questions.

Tech educational collective The Geek Group, based in Grand Rapids, Michigan, has more than 25,000 members, scattered all over the world — most of whom have never been to their flagship location in Michigan. Sadly, a fire Thursday damaged one of the facilities at their Leonard Street Labs (damage report starts about 26 minutes into this video), the High Voltage Lab. Since there aren't that many places for amateurs and hobbyists to learn about high voltage (even with the growing number of maker spaces around the world), that leaves a hole that hopefully will soon be filled; lucky for anyone interested, The Geek Group welcomes volunteers.

schwit1 writes "Illinois passed a new state law that set back the efforts of the People for the Ethical Treatment of Animals (PETA), making the use of drones to interfere with hunters and fishermen prohibited. The law was created in response to PETA's plan to employ drones called "air angels" to monitor outdoors enthusiasts engaged in hunting and fishing nationwide."

DeviceGuru writes "A Russian startup called Virt2real has produced a small $120 Linux-based WiFi controller board for remote control and video observation applications, and has demonstrated its use in a remote controlled car. Inspired by Back to the Future and James Bond film Tomorrow Never Dies, Virt2real's Bond Car demo (YouTube video) shows a Vauxhall (Opel) Vectra being remotely controlled by an iPad via WiFi. The iPad interface includes touchscreen-based steering wheel, brakes, and accelerator, which are mirrored in the car by a mechanical contraption that physically turns the steering wheel and pushes the brake and accelerator pedals. The company is now accepting orders for the first 1,000 of its Virt2real controller board, and is working on a Virt2real-based Bond Car it that will work with most cars."