dcblogs writes With parts from an electric motor, a few household items, an open-source hardware board running Linux, and some coding, Thomas Ruecker, built a connected toilet that Tweets with each flush. The first reaction to the Twitter feed at @iotoilets may be a chuckle. But the idea behind this and what it illustrates is serious. It tracks water usage, offers a warning about the future of privacy in the Internet of Things, and may say something about the modern job hunt. Ruecker built his device on a recent long weekend after he was laid off as an open source evangelist at a technology firm undergoing "rightsizing," as he put it.

An anonymous reader writes Forget about some kid engineering a virulent microbe in their bedroom. As the assistant director of the Maurice Kanbar Center for Biomedical Engineering, Oliver Medvedik, puts it, "It's extremely difficult to 'improve' on the lethality of nature. The pathogens that already exist are more legitimate cause for worry.” If anything, you're better off putting energy into wrenching away your desire for McDonalds, and making sure the government doesn't impose draconian laws about DIY-bio. Here's a look at the grassroots future of biohacking and the problems with government overreach.

szczys writes: Intel is upping their bid for a place at the efficient-yet-powerful device table. They've launched their Edison board, which features an x86 based SoC running at 100 MHz. The footprint measures 35.5mm x 25.0mm and offers a 70-pin connector to break out 40 pins for add-on hardware. Also at the Intel Developer Forum today, the company demonstrated a PC running on Skylake, a new CPU microarchitecture based on the 14nm process used for Broadwell. Intel is pushing to break into both wearable devices and household devices, as it sees both as huge opportunities for growth.

An anonymous reader writes I am currently a combat veteran in the care of the VA Hospital. A lot of veterans here suffer from PTSD and other injuries related to combat and trauma. As part of the healing process, the VA finds it good that we take up hobbies such as art or music, and they supply us kits and stuff to put together and paint. This is great, but many of us younger veterans have an interest in robotics and electronics. Do you know of some good and basic robotic and electronic kits that can be ordered or donated to Veterans out there? Any information would be appreciated.

Tekla Perry (3034735) writes "Scott Hassan, founder of robotic research lab Willow Garage, is behind a large real estate development in Menlo Park, Calif. He reportedly plans to create an incubator village with 18,500 square meters of workspace and another 18,500 square meters of living space on a 30,000 square meter site, combining the advantages of a garage startup environment (what could be more convenient than working where you live) and an incubator (access to other smart entrepreneurs and ideas)." Would you want to live in this kind of environment?

MTorrice (2611475) writes "Researchers have harnessed that heat from a computer CPU to run the polymerase chain reaction (PCR) to amplify DNA in a blood sample. The team developed software that cycles the temperature of the CPU to drive PCR's three distinct steps.The method allowed them to detect miniscule amounts of DNA from a pathogenic parasite that causes Chagas disease. They hope their technique will lead to low-cost diagnostic tests in developing countries." (Always good to put waste heat to a practical purpose.)

An anonymous reader writes "Moon+ Pro Reader, FBReader, Kindle, you name it--many popular Android e-book apps can run on a smartphone available for $20 and shipping. The trick is to respect the device's limits and keep down the number of apps you install. This fun isn't for eager multitaskers. On the bright side, the $20 phone can do Acapela TTS, includes a 4GB memory card and works with cards of up to 32GB--easily enough for scads of pre-loaded books. Plus, the WiFi is great. And the screen of 3.2 inches isn't that much smaller than the 3.5 inchers on the older iPads. What could cell phone e-reading mean in the many "book deserts" of the U.S.? And how about the U.K. where miserly pols are closing libraries even though the Guardian says "a third of UK children do not own a single book and three-quarters claim never to read outside school"? The smartphone post on the LibraryCity site tells how librarians and others could start "cell phone book clubs" to promote the discovery and absorption of books as well as smarter use of technology."

sfcrazy writes The Raspberry Pi team has announced a new browser for Raspberry Pi. They had worked with Collabora to create an HTML5-capable, modern browser for Pi users. While announcing the new browser, Eben Upton said, "Eight months and a lot of hard work later, we're finally ready. Epiphany on Pi is now a plausible alternative to a desktop browser for all but the most JavaScript-heavy sites."

An anonymous reader writes "Anyone who might have been interested in the miniature Raspberry Pi compatible board mentioned here a month ago should know the board has been cancelled due to problems sourcing the Broadcom SoC. Given the less than welcoming response from the rpi community to the board's release, there is speculation as to why Hardkernel is having trouble buying the chip.

DeviceGuru (1136715) writes "In a bid to harness the energy and enthusiasm swirling around today's open, hackable single board computers, Imagination Technologies, licensor of the MIPS ISA, has unveiled the Creator C120 development board, the ISA's counter to ARM's popular Raspberry Pi and BeagleBone Black SBCs. The MIPS dev board is based on a 1.2GHz dual-core MIPS32 system-on-chip and has 1GB RAM and 8GB flash, and there's also an SD card slot for expansion. Ports include video, audio, Ethernet, both WiFi and Bluetooth 4.0, and a bunch more. OS images are already available for Debian 7, Gentoo, Yocto, and Arch Linux, and Android v4.4 is expected to be available soon. Perhaps the most interesting feature of the board is that there's no pricing listed yet, because the company is starting out by giving the boards away free to developers who submit the most interesting projects."

Nerval's Lobster writes Labor Day is nigh, and with it the official end of summer. It's time to pack away the umbrellas and beach towels, and perhaps spend a few minutes flipping through photos of all the fun times you had over the past couple months: the grilling, the trips, the fireworks oh yes, the fireworks Chances are pretty good that you've set off more than a few fireworks in your time. But Colin Furze, the British inventor and YouTube celebrity who once co-hosted Sky1's Gadget Geeks? Well, he puts everybody's love of fireworks to shame. He loves fireworks so much, in fact, that he built a giant metal suit so he could stand in the middle of an epic pyrotechnic display. No matter how good your own engineering skills (or strong your courage), it's inadvisable to try this at home. But it's sure fun to watch.

the_newsbeagle writes: To make a brain-machine interface, you need a way to capture neurons' electric signals. The most precise and most invasive way uses implants that are stuck in the gray matter. The least precise and least invasive way uses EEG sensors stuck to the scalp. But researchers at Johns Hopkins University say there's a third way that gets the best of both worlds, which is not too invasive and fairly precise. They use ECoG systems, in which a mesh of electrodes is placed under the skull, draped over the surface of the cortex.

They're testing their systems on epilepsy patients, who have these ECoG systems inserted anyway while they're waiting for surgery (the electrodes record the source of their seizures). The researchers are capturing these patients' movement commands from their brains, and using them to control robotic limbs. Someday such a system could be used by amputees to control their prosthetic limbs.

Today's videos are parts five and six of our casual interview with Tim O'Reilly, founder of O'Reilly Media and one of the most influential open source boosters around. (You supplied the questions. He supplied the answers.) We had a lot more to say about Tim Tuesday when we ran parts one and two of our video interview with him. Yesterday we ran parts three and four. (Today's alternate Video Links: Video 5 ~ Video 6.)

A while ago you had a chance to ask Andrew "bunnie" Huang about hardware, hacking and his open source hardware laptop Novena. Below you'll find his answers to those questions.

Today's videos are parts three and four of our casual interview with Tim O'Reilly, founder of O'Reilly Media and one of the most influential open source boosters around. (You supplied the questions. He supplied the answers.) We had a lot more to say about Tim yesterday when we ran parts one and two of our video interview with him. (Today's alternate Video Links: Video 3 ~ Video 4; transcript covers both videos.)

New submitter Randy-tanner (3791853) writes A well known New York architect & contractor has begun construction on what is possibly the largest 3D printing related project ever undertaken. He is 3D printing an entire estate, which includes an in-ground swimming pool, a pool house, and a huge 2400 square foot home. The project is expected to take two years to complete, and if all goes as planned the printer will automatically insert rebar into the concrete.

In June, we discussed news that JPL and MakerBot were teaming up to host a competition for designing a futuristic Mars base. The competition is now over, and the top three designs have been chosen. First place went to Noah Hornberger, who designed a base with hexagonal rooms and shielding made of depleted uranium. Second place went to a martian pyramid with an aquaponics system on top, mirror-based solar collectors, central water storage, and compartmentalized living spaces. The third place award went to Chris Starr for his Mars Acropolis, which was styled upon the ancient Greek Acropolis. It has a water tower at the top of the structure, a series of greenhouses at the bottom, and living quarters in between. The full list of 227 entries is browse-able on Thingiverse.

Wikipedia says Tim O'Reilly "is the founder of O'Reilly Media (formerly O'Reilly & Associates) and a supporter of the free software and open source movements." And so he is. O'Reilly Media is also the company from which Make magazine and the assorted Maker Faires sprang, before spinning off into an ongoing presence of their own. (This year's Solid conference, as well as the confluence of hardware and software at OSCON demonstrate O'Reilly's ongoing interest in the world of makers, though.) O'Reilly has been a powerful force in technical book publishing, popularized the term Web 2.0, and has been at least a godfather to the open source movement. He's also an interesting person in general, even more so when he's hanging out at home than when he's on stage at a conference or doing a formal interview. That's why we were glad Timothy Lord was able to get hold of Tim O'Reilly via Hangout while he was in a relaxed mood in a no-pressure environment, happy to give detailed responses based on your questions, from small (everyday technology) to big (the Internet as "global brain").

We've run a few two-part videos, but this is the first time we've split one video into six parts -- with two running today, two tomorrow, and two Thursday. But then, how many people do we interview who have had as much of an effect on the nature of information transmission -- as opposed to just publishing -- as Tim O'Reilly? We don't know for sure, but there's a good chance that O'Reilly books are owned by more Slashdot readers than books from any other publisher. That alone makes Tim O'Reilly worth listening to for nearly an hour, total. (Alternate Video Links: Video 1 ~ Video 2; transcript below covers both videos.)

New submitter ErnieKey writes: Farming has been stuck in a bit of a rut, when compared to other industries. Businesses across the globe have been innovating for decades, while farming has been using techniques that have been handed down from centuries ago. The FarmBot Foundation is creating a machine, similar to that of a CNC mill and/or 3D printer, which is capable of being run by sophisticated software and equipped with any tools you can imagine, including seed injectors, plows, burners, robotic arms (for harvesting), cutters, shredders, tillers, discers, watering nozzles, sensors and more. The goal? To increase food production by automating as much of it as possible.

Along with the rest of the mix that makes this site work, Slashdot has nearly two decades now of spotting and showing off interesting projects, inventions, technologies, and hobbies. Some of them are strictly personal, some are frankly commercial, and some are the fruits of ambitious organizations (or tiny teams) motivated by curiosity and passion (or even politics, or just plain fun). As outlined earlier, we've been gathering a lot of these into our new Build section; read on to learn a bit more about what that includes. (And watch out later today for the first part of our conversation with technology-inspiring Rennaisance Man Tim O'Reilly, and later in the week for answers to the questions you asked Bunnie Huang.)